The next generation in Audia's Digital Audio Platform, AudiaFLEX gives
you unprecedented control of your system with the ultimate flexibility
in design. Choose any configuration of input (IP-2) and output (OP-2e) pairs
to create the system you need without compromises. Multi-Channel audio
can be seamlessly distributed among multiple units via CobraNet®, using
economical Cat-5 cable. Control the processing power of the entire network
over Ethernet, or via Crestron®, AMX®, or other popular controllers. Each
AudiaFLEX can provide up to 24 channels of I/O, or expand your options
even further with new AudiaEXPI and AudiaEXPO.
AudiaFLEX is continuously being enhanced through hardware, firmware and software upgrades such as CobraNet Latency (as low as 1.33 mS), Feedback Suppression, expanded Transfer function and other improvements.
AEC-2HD Input Cards are designed and built using Biamp's proprietary Sona™ AEC algorithm with the industry's longest tail length to deliver increased frequency response, improved audio quality, and more natural sound during full-duplex transmission of speech.
- Up to 24 inputs/outputs, any combination by pairs, with or without CobraNet
- Acoustic Echo Cancellation (AEC) available as separate input module(s)
- Control via:
- Remote control panels for level, presets, etc.
- Third-party control via RS-232
- Built-in diagnostic tools
- Remote function control via Ethernet
- Ability to select, view, and calibrate:
- Mixers: Standard, automatic, matrix, combiners
- Equalizers: Graphic, parametric
- Filters: HPF, LPF, high shelf, low shelf, all-pass
- Crossovers: 2-Way, 3-Way and 4-way
- Dynamics: Leveler, comp/limiter, ducker, ANC
- Routers: 2x4 ~ 40x40
- Delays: 0 ~ 2000mS
- Remote controls
- Meters: Signal present, peak, RMS
- Generators: Tone, pink-noise, white-noise
- Diagnostics: Transfer function
Designed exclusively for use with AudiaFLEX and AudiaFUSION systems, the Networked Paging
Station-1 is a microphone console engineered to carry audio, control and power all through a single
cable. Featuring an innovative user interface, the NPS-1 allows users to quickly switch between
pre-programmed paging groups and zones, making it perfect for stadiums, convention centers, shopping
malls, hospitals and similar facilities. This CE-marked and RoHS-compliant microphone integrates with
AudiaFLEX and AudiaFUSION networks via CobraNet® and can be used with in multiple station/multiple device systems.
Additional benefits include 16 priorities with override and lockout functions, 32 programmable button
operations, 16 simultaneous pages and the choice of Power Over Ethernet (PoE) or external power supply.
VoIP-2 Dual-Channel Voice Over Internet Protocol Cards
VoIP-2 Cards for AudiaFLEX enable conferencing over VoIP directly from AudiaFLEX, with two channels of VoIP
interface per card. VoIP-2 cards allow AudiaFLEX to connect directly to IP-based phone systems and eliminate
the need for VoIP adapters. Used in conjunction with AEC-2HD Dual-Channel Wideband Acoustic Echo Cancellation
Input Cards and TI-2 Dual-Channel Telephone Interface Cards, the VoIP-2 Card makes AudiaFLEX the most powerful,
flexible, and affordable telephone conferencing product available. Combined with the TI-2 Card and/or CODEC,
the VoIP-2 Card makes it possible to create redundancies within a conferencing system for multi-point conferences
and/or back-up to VoIP lines. Up to six VoIP-2 cards can be installed into a single AudiaFLEX unit.
AEC-2HD Dual-Channel Wide-Band Acoustic Echo Cancellation Input Cards
Audia has always been ideal for audio and video conferencing. Now,
AEC-2HD Input Cards allow each AudiaFLEX
installation to have precisely the acoustic echo cancellation needed. With the ability to select AEC on
individual input channels, your network conferencing can enjoy the power and flexibility of Audia. Each
AEC-2HD Input Card provides two channels of acoustic echo cancellation and background noise reduction,
as part of AudiaFLEX hardware. AEC-2HD Input Cards are designed and built using Biamp's proprietary
Sona™ AEC algorithm for increased frequency response, improved audio quality, and more natural
sound during full-duplex transmission of speech. Additional benefits include greater tolerance for differing
signal levels, enhanced intelligibility and fast, easy setup.
PA-2 Dual-Channel Power Amplifier Cards
PA-2 amplifier cards allow
AudiaFLEX to directly power 4, 6, or 8 ohm speakers. The output power is software configurable from 5 to 30
watts dual-channel and from 10 to 60 watts mono-bridged. An upgraded AudiaFLEX power supply provides a total
of 120 watts of power, for up to twelve PA-2 cards.
IP-2 Dual-Channel Mic/Line Input Cards
IP-2 input cards allow
each AudiaFLEX installation to have the quantity and type of inputs required. Each IP-2 Card provides
two channels of mic/line input, as part of AudiaFLEX hardware. Inputs are balanced, and are provided
on plug-in barrier strip connectors. Software control of individual inputs includes: gain w/ peak
indication; +48V phantom power; mute; level; and signal invert.
TI-2 Dual-Channel Telephone Interface Cards
Telephone Interface Cards allow AudiaFLEX to connect directly to standard analog lines. Being more
than just a normal 'hybrid', each channel of the TI-2 includes line-echo cancellation, noise suppression,
caller ID decoding, ring detection/validation, DTMF tone dialing, DTMF decoding, and call progress
tone decoding. Used in conjunction with AEC-2HD Acoustic Echo Cancellation Cards, the TI-2 makes
AudiaFLEX the most powerful, flexible, and affordable telephone conferencing product available.
The TI-2 also allows AudiaFLEX to respond to DTMF control commands such as preset recalls from any
telephone system. The TI-2 can be used for audio input-only applications such as paging access; or
for audio output-only applications such as broadcast feeds and remote system monitoring. Up to
twelve TI-2 Telephone Interface Cards can be installed into a single AudiaFLEX unit.
OP-2e Dual-Channel Mic/Line Output Cards
OP-2e output cards allow
each AudiaFLEX installation to have the quantity and type of outputs required. Each OP-2e Card provides
two channels of mic/line output, as part of AudiaFLEX hardware. Outputs are balanced, and are provided
on plug-in barrier strip connectors. Software control of individual outputs includes: mute; level;
signal invert; and full-scale output reference.