Tesira
- Fixed Audio DSP
- TesiraFORTÉ AI
- TesiraFORTÉ AVB AI
- TesiraFORTÉ DAN AI
- TesiraFORTÉ CI
- TesiraFORTÉ AVB CI
- TesiraFORTÉ DAN CI
- TesiraFORTÉ VT
- TesiraFORTÉ AVB VT
- TesiraFORTÉ DAN VT
- TesiraFORTÉ AVB VT4
- TesiraFORTÉ DAN VT4
- Amplifiers
- Tesira AMP-450BP
- Tesira AMP-450P
- TesiraXEL 1200.1
- TesiraXEL 1200.2
- Tesira AMP-4175R
- Tesira AMP-4300R CV
- Tesira AMP-4350R
- Tesira AMP-8175R
- AMP-A460H
- Expanders
- TesiraCONNECT
- TesiraCONNECT TC-5D
- Tesira EX-IN
- Tesira EX-AEC
- Tesira EX-IO
- Tesira EX-OUT
- Tesira EX-MOD
- Tesira EX-UBT
- Microphones
- Parlé TCM-X Ceiling
- Parlé TCM-XA Ceiling
- Parlé TCM-XEX Ceiling
- Parlé TTM-X Tabletop
- Parlé TTM-XEX Tabletop
- Parlé TCM-1 Pendant
- Parlé TCM-1A Pendant
- Parlé TCM-1EX Pendant
- CM1 Ceiling Microphones
Controls.
Tesira EX-LOGIC
Tesira EX-LOGIC
The Tesira EX-LOGIC is a half-rack logic box for use with Tesira audio DSPs. The EX-LOGIC provides both logic inputs and outputs and, through software, can be configured as a control interface. There are 16 total connections that can be used as inputs or outputs. 12 of the connections are designed as logic connections only and will accept contact closure or 5V TTL for input or provide a maximum of 40V/500mA for output. The remaining four connections can also be used for logic connections or as variable voltage control inputs (e.g. interface to a potentiometer). The EX-LOGIC also provides a serial port for the output of command strings that can be used to send action commands to other equipment in the system. The EX-LOGIC communicates over Ethernet with the Tesira control network for data transmission, configuration and control, and is powered by PoE (IEEE 802.3at Class 1, 4W).
- 16 total logic connections that can be used as inputs or outputs
- 4 of the 16 connections can be used as voltage control inputs
- Inputs can control actions within the software including: presets, mutes, ducking, room combining, paging functions, and much more
- Outputs can trigger status relays or indicators, or provide logic input to other controllable equipment
- Serial port for the output of command strings
- Connects to Tesira SERVER, SERVER-IO or TesiraFORTÉ over Ethernet
- Powered by PoE (IEEE 802.3at Class 1, 4W)
- Plug-in barrier strip connections
- Front panel LEDs for device status indications
- Half-rack chassis
- Covered by Biamp Systems’ five-year warranty
The Tesira EX-LOGIC is a half-rack logic box for use with Tesira audio DSPs. The EX-LOGIC provides both logic inputs and outputs and, through software, can be configured as a control interface. There are 16 total connections that can be used as inputs or outputs. 12 of the connections are designed as logic connections only and will accept contact closure or 5V TTL for input or provide a maximum of 40V/500mA for output. The remaining four connections can also be used for logic connections or as variable voltage control inputs (e.g. interface to a potentiometer). The EX-LOGIC also provides a serial port for the output of command strings that can be used to send action commands to other equipment in the system. The EX-LOGIC communicates over Ethernet with the Tesira control network for data transmission, configuration and control, and is powered by PoE (IEEE 802.3at Class 1, 4W).
- 16 total logic connections that can be used as inputs or outputs
- 4 of the 16 connections can be used as voltage control inputs
- Inputs can control actions within the software including: presets, mutes, ducking, room combining, paging functions, and much more
- Outputs can trigger status relays or indicators, or provide logic input to other controllable equipment
- Serial port for the output of command strings
- Connects to Tesira SERVER, SERVER-IO or TesiraFORTÉ over Ethernet
- Powered by PoE (IEEE 802.3at Class 1, 4W)
- Plug-in barrier strip connections
- Front panel LEDs for device status indications
- Half-rack chassis
- Covered by Biamp Systems’ five-year warranty
Additional Information
Tesira HD-1
Tesira HD-1
The Tesira HD-1 is a dialer for Tesira audio DSPs, providing access to all of the dialing functions within Tesira. With the look and feel of a traditional telephone dial pad, the HD-1 makes installations less expensive, easier to commission, and less complicated to operate. The four context (soft) buttons can be assigned to control functions in Tesira software. The HD-1 is compatible with Tesira SERVER and SERVER-IO with STC-2 or SVC- 2 cards installed, as well as all models of TesiraFORTÉ VT and TesiraFORTÉ VT4 devices.
- Telephony control over Ethernet
- 12-button dial pad
- Redial, call volume adjustment, mute, hold, and numerous other telephony functions
- Four context (soft) buttons can be assigned to control functions
- Propagates privacy mute state to other devices
- Internal universal power supply
- 100 programmable speed dial numbers; entries can be updated directly on the phone or in software
- Powered by PoE (IEEE 802.3at Class 1, 4W)
- Covered by Biamp Systems’ five-year warranty
The Tesira HD-1 is a dialer for Tesira audio DSPs, providing access to all of the dialing functions within Tesira. With the look and feel of a traditional telephone dial pad, the HD-1 makes installations less expensive, easier to commission, and less complicated to operate. The four context (soft) buttons can be assigned to control functions in Tesira software. The HD-1 is compatible with Tesira SERVER and SERVER-IO with STC-2 or SVC- 2 cards installed, as well as all models of TesiraFORTÉ VT and TesiraFORTÉ VT4 devices.
- Telephony control over Ethernet
- 12-button dial pad
- Redial, call volume adjustment, mute, hold, and numerous other telephony functions
- Four context (soft) buttons can be assigned to control functions
- Propagates privacy mute state to other devices
- Internal universal power supply
- 100 programmable speed dial numbers; entries can be updated directly on the phone or in software
- Powered by PoE (IEEE 802.3at Class 1, 4W)
- Covered by Biamp Systems’ five-year warranty
Additional Information
For more design guides, visit our interactive design guides website.
Tesira TEC-1i
Tesira TEC-1i
The Tesira TEC-1i is an Ethernet control device for use with all Tesira systems. It offers a simple, intuitive interface for end users and can be installed and configured to fit the unique needs of a particular application. The TEC-1i connect via standard CAT-5/6/7 cabling and is powered over Ethernet, eliminating the need for custom cabling and local power sources. Multiple remote control panels can be connected over large distances using standard network technology. The TEC-1i can be flush-mounted into any wall.
- Adjustment and/or initiation of 32 selectable system volumes and actions
- Volumes are any individual or grouped system levels, including inputs, outputs, matrix cross-points, etc.
- Actions are any individual or grouped system operations, including presets, source selection, mutes, ducking, combining, etc.
- Control functions are programmed in the Tesira system design software
- High contrast OLED display with a wide viewing angle
- The display brightness can be adjusted to fit the ambient light present in the application and automatically dims when not in use
- Capacitive touch technology eliminates protruding and moving parts to increase product reliability and longevity while simplifying cleaning
- 330’ (100m) Ethernet cable length can be extended with standard PoE network technology (routers, switches, hubs, media converters)
- Connects with standard RJ-45 or IDC connector
- Covered by Biamp Systems’ five-year warranty
The Tesira TEC-1i is an Ethernet control device for use with all Tesira systems. It offers a simple, intuitive interface for end users and can be installed and configured to fit the unique needs of a particular application. The TEC-1i connect via standard CAT-5/6/7 cabling and is powered over Ethernet, eliminating the need for custom cabling and local power sources. Multiple remote control panels can be connected over large distances using standard network technology. The TEC-1i can be flush-mounted into any wall.
- Adjustment and/or initiation of 32 selectable system volumes and actions
- Volumes are any individual or grouped system levels, including inputs, outputs, matrix cross-points, etc.
- Actions are any individual or grouped system operations, including presets, source selection, mutes, ducking, combining, etc.
- Control functions are programmed in the Tesira system design software
- High contrast OLED display with a wide viewing angle
- The display brightness can be adjusted to fit the ambient light present in the application and automatically dims when not in use
- Capacitive touch technology eliminates protruding and moving parts to increase product reliability and longevity while simplifying cleaning
- 330’ (100m) Ethernet cable length can be extended with standard PoE network technology (routers, switches, hubs, media converters)
- Connects with standard RJ-45 or IDC connector
- Covered by Biamp Systems’ five-year warranty
Additional Information
For more design guides, visit our interactive design guides website.
Tesira TEC-1s
Tesira TEC-1s
The Tesira TEC-1s is an Ethernet control device for use with all Tesira systems. It offers a simple, intuitive interface for end users and can be installed and configured to fit the unique needs of a particular application. The TEC-1s connects via standard CAT-5/6/7 cabling and is powered over Ethernet, eliminating the need for custom cabling and local power sources. Multiple remote control panels can be connected over large distances using standard network technology. The TEC-1s is surface-mounted.
- Adjustment and/or initiation of 32 selectable system volumes and actions
- Volumes are any individual or grouped system levels, including inputs, outputs, matrix cross-points, etc.
- Actions are any individual or grouped system operations, including presets, source selection, mutes, ducking, combining, etc.
- Control functions are programmed in the Tesira system design software
- High contrast OLED display with a wide viewing angle
- The display brightness can be adjusted to fit the ambient light present in the application and automatically dims when not in use
- Capacitive touch technology eliminates protruding and moving parts to increase product reliability and longevity while simplifying cleaning
- 330’ (100m) Ethernet cable length can be extended with standard PoE network technology (routers, switches, hubs, media converters)
- Connects with standard RJ-45 or IDC connector
- Covered by Biamp Systems’ five-year warranty
The Tesira TEC-1s is an Ethernet control device for use with all Tesira systems. It offers a simple, intuitive interface for end users and can be installed and configured to fit the unique needs of a particular application. The TEC-1s connects via standard CAT-5/6/7 cabling and is powered over Ethernet, eliminating the need for custom cabling and local power sources. Multiple remote control panels can be connected over large distances using standard network technology. The TEC-1s is surface-mounted.
- Adjustment and/or initiation of 32 selectable system volumes and actions
- Volumes are any individual or grouped system levels, including inputs, outputs, matrix cross-points, etc.
- Actions are any individual or grouped system operations, including presets, source selection, mutes, ducking, combining, etc.
- Control functions are programmed in the Tesira system design software
- High contrast OLED display with a wide viewing angle
- The display brightness can be adjusted to fit the ambient light present in the application and automatically dims when not in use
- Capacitive touch technology eliminates protruding and moving parts to increase product reliability and longevity while simplifying cleaning
- 330’ (100m) Ethernet cable length can be extended with standard PoE network technology (routers, switches, hubs, media converters)
- Connects with standard RJ-45 or IDC connector
- Covered by Biamp Systems’ five-year warranty
Additional Information
For more design guides, visit our interactive design guides website.
TEC-X
TEC-X
Distinguished by its modern design aesthetic, the TEC-X family of AV control pads provide simple, intuitive interfaces for presentation spaces and conference rooms via highly intuitive capacitive touch capabilities, delivered at the price of a keypad controller. Equipped with an LCD, all TEC-X models are PoE powered, wallmountable, and daisy chainable, which greatly reduces cabling requirements and installation time. In addition, they support all TTP commands and can be quickly programmed and customized within Tesira software as the needs of the room change over time, making TEC-X a very flexible and cost effective control solution.
- Ethernet-based control solution for Tesira systems
- Push button simplicity for room operations
- Two models are available:
- TEC-X 1000 — includes a dedicated rotary encoder
and supports up to six interface buttons - TEC-X 2000 — supports up to 12 buttons
- TEC-X 1000 — includes a dedicated rotary encoder
- Control functions of onscreen buttons are easily programmed in Tesira design software
- High contrast touch-enabled LCD provides easy-to-read on-screen text and status messages
- Display brightness can adjust automatically to the ambient light level
- Assignable LED light bar provides optional feedback for mute and system state
- PoE powered — simple, single CAT5e/CAT6 cable installation
- Up to four devices can be daisy chained together
- Supports all TTP commands
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ 5-year warranty
Distinguished by its modern design aesthetic, the TEC-X family of AV control pads provide simple, intuitive interfaces for presentation spaces and conference rooms via highly intuitive capacitive touch capabilities, delivered at the price of a keypad controller. Equipped with an LCD, all TEC-X models are PoE powered, wallmountable, and daisy chainable, which greatly reduces cabling requirements and installation time. In addition, they support all TTP commands and can be quickly programmed and customized within Tesira software as the needs of the room change over time, making TEC-X a very flexible and cost effective control solution.
- Ethernet-based control solution for Tesira systems
- Push button simplicity for room operations
- Two models are available:
- TEC-X 1000 — includes a dedicated rotary encoder
and supports up to six interface buttons - TEC-X 2000 — supports up to 12 buttons
- TEC-X 1000 — includes a dedicated rotary encoder
- Control functions of onscreen buttons are easily programmed in Tesira design software
- High contrast touch-enabled LCD provides easy-to-read on-screen text and status messages
- Display brightness can adjust automatically to the ambient light level
- Assignable LED light bar provides optional feedback for mute and system state
- PoE powered — simple, single CAT5e/CAT6 cable installation
- Up to four devices can be daisy chained together
- Supports all TTP commands
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ 5-year warranty
Additional Information
Contact Us.
Our sales and support teams are ready to help.
Contact us today.
sales
9300 SW Gemini Drive
Beaverton, OR 97008 USAEmail:
moc.pmaib@ofnipmaibUS Phone:
1 800 826 1457International Phone:
+1 503 641 7287support
Biamp Support:
moc.pmaib@troppusUS Phone:
1 877 BIAMP XO (1 877 242 6796)International Phone:
Choose Your RegionReturn Authorization Requests:
RA Forms