Tesira
- Fixed Audio DSP
- TesiraFORTÉ AI
- TesiraFORTÉ AVB AI
- TesiraFORTÉ DAN AI
- TesiraFORTÉ CI
- TesiraFORTÉ AVB CI
- TesiraFORTÉ DAN CI
- TesiraFORTÉ VT
- TesiraFORTÉ AVB VT
- TesiraFORTÉ DAN VT
- TesiraFORTÉ AVB VT4
- TesiraFORTÉ DAN VT4
- Amplifiers
- Tesira AMP-450BP
- Tesira AMP-450P
- TesiraXEL 1200.1
- TesiraXEL 1200.2
- Tesira AMP-4175R
- Tesira AMP-4300R CV
- Tesira AMP-4350R
- Tesira AMP-8175R
- AMP-A460H
- Expanders
- TesiraCONNECT TC-5
- TesiraCONNECT TC-5D
- Tesira EX-IN
- Tesira EX-AEC
- Tesira EX-IO
- Tesira EX-OUT
- Tesira EX-MOD
- Tesira EX-UBT
Amplifiers.
Tesira AMP-450BP
Tesira AMP-450BP
The Tesira AMP-450BP is an AVB/TSN enabled, four channel amplifier with PoE+ for use with the Desono C-IC6 ceiling speakers.
Capable of mounting directly to the back of the speaker, this amplifier greatly reduces cost by minimizing the cabling between the ceiling devices and the rack room. Each AMP-450BP comes with an optional mechanical enclosure to protect electrical connections and comply with code requirements for above ceiling installations. Tightly integrated with our other Tesira conferencing products, Biamp is providing the only AV end-to-end solution of microphone-to-speaker with standard CAT cables. The result is a conferencing system that is fast to deploy and provides a superior audio experience. The Tesira AMP-450BP is capable of operating in a burst mode to handle peak signals, providing up to 50 watts (4Ω) or 30 watts (8Ω) per channel.
The Tesira AMP-450BP complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier with burst mode to handle peak signals; supports up to 50W (4Ω) or 30W (8Ω) per channel
- Designed to fit on top of C-IC6 speaker via backpack or mounted separately
- Powered by PoE+ (IEEE 802.3at Class 4, 30W)
- Class D amplifier topology
- Four RJ-45 output jacks
- Audible locate button
- Software-selectable power vs. channel count
- Includes internal limiter function
- BPAK accessory included
- Fanless operation
- Evaluated to the requirements of UL 2043 and is suitable for use in air handling spaces
- LED indicators for power/status and amp status
- Configurable via Tesira software
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
The Tesira AMP-450BP is an AVB/TSN enabled, four channel amplifier with PoE+ for use with the Desono C-IC6 ceiling speakers.
Capable of mounting directly to the back of the speaker, this amplifier greatly reduces cost by minimizing the cabling between the ceiling devices and the rack room. Each AMP-450BP comes with an optional mechanical enclosure to protect electrical connections and comply with code requirements for above ceiling installations. Tightly integrated with our other Tesira conferencing products, Biamp is providing the only AV end-to-end solution of microphone-to-speaker with standard CAT cables. The result is a conferencing system that is fast to deploy and provides a superior audio experience. The Tesira AMP-450BP is capable of operating in a burst mode to handle peak signals, providing up to 50 watts (4Ω) or 30 watts (8Ω) per channel.
The Tesira AMP-450BP complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier with burst mode to handle peak signals; supports up to 50W (4Ω) or 30W (8Ω) per channel
- Designed to fit on top of C-IC6 speaker via backpack or mounted separately
- Powered by PoE+ (IEEE 802.3at Class 4, 30W)
- Class D amplifier topology
- Four RJ-45 output jacks
- Audible locate button
- Software-selectable power vs. channel count
- Includes internal limiter function
- BPAK accessory included
- Fanless operation
- Evaluated to the requirements of UL 2043 and is suitable for use in air handling spaces
- LED indicators for power/status and amp status
- Configurable via Tesira software
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
Additional Information
Tesira AMP-450P
Tesira AMP-450P
The Tesira AMP-450P is an AVB/TSN enabled, PoE+, four-channel amplifier. The output channels are software configurable, including selectable power versus channel count. The AMP-450P includes an internal limiter, and is capable of providing 3 watts of
continuous power to all four channels. The Tesira AMP-450P is also capable of operating in a burst mode to handle peak signals, providing up to 50 watts (4Ω) or 30 watts (8Ω) per channel.
Amplifier Power Calculator
The Tesira AMP-450P complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier; 3W continuous power per channel
- Burst mode to handle peak signals; supports up to 50W (4Ω) or 30W (8Ω) per channel
- PoE+ powered
- Class D amplifier topology
- Fanless operation
- Software-selectable power vs. channel count
- Includes internal limiter function
- Evaluated to the requirements of UL 2043 and is suitable for use in air handling spaces
- LED indicators for power/status and amp status
- Configurable via Tesira software
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
The Tesira AMP-450P is an AVB/TSN enabled, PoE+, four-channel amplifier. The output channels are software configurable, including selectable power versus channel count. The AMP-450P includes an internal limiter, and is capable of providing 3 watts of
continuous power to all four channels. The Tesira AMP-450P is also capable of operating in a burst mode to handle peak signals, providing up to 50 watts (4Ω) or 30 watts (8Ω) per channel.
Amplifier Power Calculator
The Tesira AMP-450P complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier; 3W continuous power per channel
- Burst mode to handle peak signals; supports up to 50W (4Ω) or 30W (8Ω) per channel
- PoE+ powered
- Class D amplifier topology
- Fanless operation
- Software-selectable power vs. channel count
- Includes internal limiter function
- Evaluated to the requirements of UL 2043 and is suitable for use in air handling spaces
- LED indicators for power/status and amp status
- Configurable via Tesira software
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
Additional Information
TesiraXEL 1200.1
TesiraXEL 1200.1
TesiraXEL™ 1200.1 is an AVB/TSN enabled, digital networked, four channel amplifier.
The 1200.1 delivers extraordinary flexibility — from power distribution, to selectable speaker impedance, to connectivity options, it’s an ideal choice. The 1200.1 leverages a unique power distribution architecture allowing users to distribute 1-100% of available power to any channel. The TesiraXEL 1200.1 also supports both selectable impedance (4Ω, 8Ω, 70V, or 100V) and delay equalization per channel, allowing for maximum design flexibility.
To streamline installations, the 1200.1 includes an audible locate function on the front panel to validate connected loudspeaker runs without requiring the amplifier to be configured. The TesiraXEL 1200.1 comes with a software-configurable media interface, allowing designers to choose their preferred network topology — redundancy, daisy chain, single-cable, or separate control and media are all supported.
The 1200.1 is ideal for training rooms, lecture halls, performing arts venues, houses of worship or other applications where sound distribution or reinforcement is needed.
The TesiraXEL 1200.1 complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier
- 100% asymmetrical loading per channel
- Selectable impedance per channel: 4Ω, 8Ω, 70V, 100V
- Configurable media interface: support for daisy chain, network redundancy, and single cable
- Audible locate available from the front panel
- Auto standby mode
- Supports delay equalization per channel
- Supports port authentication via IEEE 802.1X
- Configurable via Tesira software
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
TesiraXEL™ 1200.1 is an AVB/TSN enabled, digital networked, four channel amplifier.
The 1200.1 delivers extraordinary flexibility — from power distribution, to selectable speaker impedance, to connectivity options, it’s an ideal choice. The 1200.1 leverages a unique power distribution architecture allowing users to distribute 1-100% of available power to any channel. The TesiraXEL 1200.1 also supports both selectable impedance (4Ω, 8Ω, 70V, or 100V) and delay equalization per channel, allowing for maximum design flexibility.
To streamline installations, the 1200.1 includes an audible locate function on the front panel to validate connected loudspeaker runs without requiring the amplifier to be configured. The TesiraXEL 1200.1 comes with a software-configurable media interface, allowing designers to choose their preferred network topology — redundancy, daisy chain, single-cable, or separate control and media are all supported.
The 1200.1 is ideal for training rooms, lecture halls, performing arts venues, houses of worship or other applications where sound distribution or reinforcement is needed.
The TesiraXEL 1200.1 complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier
- 100% asymmetrical loading per channel
- Selectable impedance per channel: 4Ω, 8Ω, 70V, 100V
- Configurable media interface: support for daisy chain, network redundancy, and single cable
- Audible locate available from the front panel
- Auto standby mode
- Supports delay equalization per channel
- Supports port authentication via IEEE 802.1X
- Configurable via Tesira software
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
Additional Information
TesiraXEL 1200.2
TesiraXEL 1200.2
TesiraXEL™ 1200.2 is an AVB/TSN enabled, digital networked, four channel amplifier. The 1200.2 delivers extraordinary flexibility — from power distribution, to selectable speaker impedance, to connectivity options, it’s an ideal choice.
The 1200.2 is equipped with two 1200W power banks; each bank supports two channels to provide greater power density per rack unit. It leverages a unique power distribution architecture allowing users to distribute 1-100% of available power across the power bank.
The TesiraXEL 1200.2 also supports both selectable impedance (4Ω, 8Ω, 70V, or 100V) and delay equalization per channel, allowing for maximum design flexibility.
To streamline installations, the 1200.2 includes an audible locate function on the front panel to validate connected loudspeaker runs without requiring the amplifier to be configured. The TesiraXEL 1200.2 comes with a software-configurable media interface, allowing designers to choose their preferred network topology — redundancy, daisy chain, single-cable, or separate control and media are all supported.
The 1200.2 is ideal for training rooms, lecture halls, performing arts venues, houses of worship or other applications where sound distribution or reinforcement is needed.
The complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier
- 100% asymmetrical loading per power bank
- Selectable impedance per channel: 4Ω, 8Ω, 70V, 100V
- Configurable media interface: support for daisy chain, network redundancy, and single cable
- Audible locate available from the front panel
- Auto standby mode
- Supports delay equalization per channel
- Supports port authentication via IEEE 802.1X
- Configurable via Tesira software
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
TesiraXEL™ 1200.2 is an AVB/TSN enabled, digital networked, four channel amplifier. The 1200.2 delivers extraordinary flexibility — from power distribution, to selectable speaker impedance, to connectivity options, it’s an ideal choice.
The 1200.2 is equipped with two 1200W power banks; each bank supports two channels to provide greater power density per rack unit. It leverages a unique power distribution architecture allowing users to distribute 1-100% of available power across the power bank.
The TesiraXEL 1200.2 also supports both selectable impedance (4Ω, 8Ω, 70V, or 100V) and delay equalization per channel, allowing for maximum design flexibility.
To streamline installations, the 1200.2 includes an audible locate function on the front panel to validate connected loudspeaker runs without requiring the amplifier to be configured. The TesiraXEL 1200.2 comes with a software-configurable media interface, allowing designers to choose their preferred network topology — redundancy, daisy chain, single-cable, or separate control and media are all supported.
The 1200.2 is ideal for training rooms, lecture halls, performing arts venues, houses of worship or other applications where sound distribution or reinforcement is needed.
The complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier
- 100% asymmetrical loading per power bank
- Selectable impedance per channel: 4Ω, 8Ω, 70V, 100V
- Configurable media interface: support for daisy chain, network redundancy, and single cable
- Audible locate available from the front panel
- Auto standby mode
- Supports delay equalization per channel
- Supports port authentication via IEEE 802.1X
- Configurable via Tesira software
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
Additional Information
Tesira AMP-4175R
Tesira AMP-4175R
The Tesira AMP-4175R is a digital networked, four channel amplifier. It is AVB/TSN enabled and delivers 175 watts per channel. It is rack mountable, and part of an integrated Tesira audio network. It also offers fault reporting, impedance monitoring, and optional analog failover.
The Tesira AMP-4175R complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier; 175W per channel
- Impedance monitoring
- Configurable via Tesira software
- Dual AVB ports
- Bridgeable channels
- Optional analog failover
- Optional I/O expander card slot
- Front panel OLED display with capacitive touch navigation
- Front panel control of individual and chassis-wide mutes/levels
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
The Tesira AMP-4175R is a digital networked, four channel amplifier. It is AVB/TSN enabled and delivers 175 watts per channel. It is rack mountable, and part of an integrated Tesira audio network. It also offers fault reporting, impedance monitoring, and optional analog failover.
The Tesira AMP-4175R complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier; 175W per channel
- Impedance monitoring
- Configurable via Tesira software
- Dual AVB ports
- Bridgeable channels
- Optional analog failover
- Optional I/O expander card slot
- Front panel OLED display with capacitive touch navigation
- Front panel control of individual and chassis-wide mutes/levels
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
Additional Information
Tesira AMP-4300R CV
Tesira AMP-4300R CV
The Tesira AMP-4300R CV is a constant voltage 70V/100V, digital networked, four channel amplifier.It is AVB/TSN enabled and delivers 300 watts per channel. It is rack mountable, and part of an integrated Tesira audio network. It also offers fault reporting, impedance monitoring, and optional analog failover.
The Tesira AMP-4300R CV complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier; 300W per channel, constant voltage
- Impedance monitoring
- Configurable via Tesira software
- Dual AVB ports
- Optional analog failover
- Optional I/O expander card slot
- Front panel OLED display with capacitive touch navigation
- Front panel control of individual and chassis-wide mutes/levels
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
The Tesira AMP-4300R CV is a constant voltage 70V/100V, digital networked, four channel amplifier.It is AVB/TSN enabled and delivers 300 watts per channel. It is rack mountable, and part of an integrated Tesira audio network. It also offers fault reporting, impedance monitoring, and optional analog failover.
The Tesira AMP-4300R CV complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier; 300W per channel, constant voltage
- Impedance monitoring
- Configurable via Tesira software
- Dual AVB ports
- Optional analog failover
- Optional I/O expander card slot
- Front panel OLED display with capacitive touch navigation
- Front panel control of individual and chassis-wide mutes/levels
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
Additional Information
Tesira AMP-4350R
Tesira AMP-4350R
The Tesira AMP-4350R is a digital networked, four channel amplifier. It is AVB/TSN enabled and delivers 350 watts per channel. It is rack mountable, and part of an integrated Tesira audio network. It also offers fault reporting, impedance monitoring, and optional analog failover.
The Tesira AMP-4350R complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier; 350W per channel
- Impedance monitoring
- Configurable via Tesira software
- Dual AVB ports
- Bridgeable channels
- Optional analog failover
- Optional I/O expander card slot
- Front panel OLED display with capacitive touch navigation
- Front panel control of individual and chassis-wide mutes/levels
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
The Tesira AMP-4350R is a digital networked, four channel amplifier. It is AVB/TSN enabled and delivers 350 watts per channel. It is rack mountable, and part of an integrated Tesira audio network. It also offers fault reporting, impedance monitoring, and optional analog failover.
The Tesira AMP-4350R complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier; 350W per channel
- Impedance monitoring
- Configurable via Tesira software
- Dual AVB ports
- Bridgeable channels
- Optional analog failover
- Optional I/O expander card slot
- Front panel OLED display with capacitive touch navigation
- Front panel control of individual and chassis-wide mutes/levels
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
Additional Information
Tesira AMP-8175R
Tesira AMP-8175R
The Tesira AMP-8175R is a digital network eight channel amplifier. It is AVB/TSN enabled and delivers 175 watts per channel. It is rack mountable, and part of an integrated Tesira audio network. It also offers fault reporting, impedance monitoring, and optional analog failover.
The Tesira AMP-8175R complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Eight channel amplifier; 175W per channel
- Impedance monitoring
- Configurable via Tesira software
- Dual AVB ports
- Bridgeable channels
- Optional analog failover
- Two optional I/O expander card slots
- Front panel OLED display with capacitive touch navigation
- Front panel control of individual and chassis-wide mutes/levels
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
The Tesira AMP-8175R is a digital network eight channel amplifier. It is AVB/TSN enabled and delivers 175 watts per channel. It is rack mountable, and part of an integrated Tesira audio network. It also offers fault reporting, impedance monitoring, and optional analog failover.
The Tesira AMP-8175R complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Eight channel amplifier; 175W per channel
- Impedance monitoring
- Configurable via Tesira software
- Dual AVB ports
- Bridgeable channels
- Optional analog failover
- Two optional I/O expander card slots
- Front panel OLED display with capacitive touch navigation
- Front panel control of individual and chassis-wide mutes/levels
- Rack mountable (2RU)
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- Compliant with the US Trade Agreement Act (TAA)
Additional Information
AMP-A460H
AMP-A460H
The AMP-A460H is a four channel amplifier delivering 60 watts per channel in a sleek, compact design. It is a half-rack, D-class amplifier that operates in near silence with no need for internal cooling fans. It ships with a rack mounting kit for a single unit installation or mounting two units side-by-side.
The AMP-460H complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier; 60W per channel
- Bridgeable channels
- D-Class amplifier topology
- Three manual switches provide constant voltage operation, bridging channels, and a high-pass filter option
- Supports both 70V and 100V Constant Voltage Systems
- LED indicators for each output channel
- Rack mountable; includes mounting kit
- No additional software needed
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- TAA Compliant
The AMP-A460H is a four channel amplifier delivering 60 watts per channel in a sleek, compact design. It is a half-rack, D-class amplifier that operates in near silence with no need for internal cooling fans. It ships with a rack mounting kit for a single unit installation or mounting two units side-by-side.
The AMP-460H complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
- Four channel amplifier; 60W per channel
- Bridgeable channels
- D-Class amplifier topology
- Three manual switches provide constant voltage operation, bridging channels, and a high-pass filter option
- Supports both 70V and 100V Constant Voltage Systems
- LED indicators for each output channel
- Rack mountable; includes mounting kit
- No additional software needed
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
- TAA Compliant
Additional Information
Contact Us.
Our sales and support teams are ready to help.
Contact us today.
general information
Email:
moc.pmaib@ofnipmaibUS Phone:
1 800 826 1457International Phone:
+1 503 641 7287
technical
supportEmail Biamp Support:
moc.pmaib@troppusUS Phone:
1 877 BIAMP XO (1 877 242 6796)International Phone:
Choose Your RegionTech Return Authorization Request Cornerstone - Online Tech Support
orders
supportEmail:
moc.pmaib@sredroGlobal Phone:
1 800 826 1457 opt 1International Support:
Choose your RegionOrder & shipping status, availability
Orders Return Authorization Request