Commercial Audio

ACPL

ACPL is a wired remote control with local input for the SDQ5PIR active speaker. This audio control panel makes you forget the worries associated with the use of audio in public rooms used by different people on an almost hourly basis. No more stolen or lost remote controls, no more battery problems and no worries because of sunlight that bothers the IR receiver.

The ACPL has a brushed aluminum front that fits into any interior style. The remote-control panel can power the SDQ5PIR ON or OFF, has volume control or direct muting. A power indicating LED indicates the power status of the active speakers. Connection to the active speaker is done by a CAT5 cable which also takes care of power.

There is a selectable MIC-input (jack) for microphones and a stereo line input (mini-jack) for laptops or personal audio devices. Especially for those laptops and MP3-players ACPL has increased input sensitivity. For better speech intelligibility and to avoid “plopping” noises, there is a low-cut filter on the MIC-input.

For easy mounting two in-wall boxes are available: E-MODIN for dry walls and N-MODIN for brick walls.

ACPR

ACPR is a wired remote control with local line input for the SDQ5PIR active speaker. The ACPR audio control panel has a line input at the rear on euroblock connectors and one 3.2 mm stereo jack input on the front panel. This rear line input is in use when no jack is inserted in the front panel jack connector. Inserting a jack automatically disables the rear line input.

Connect the television of the hotel room with the ACPR and you have the perfect solution for your hotel room. The volume of the television can be controlled by the ACPR front panel on the wall. When the hotel guest wants to listen to some music on his smart device, he easily plugs in the 3.2 mm stereo jack in the front panel. The music on his mobile phone or MP3-player will play in his room. The television will be playing again automatically when the mobile device is unplugged.

The brushed aluminum front of the ACPR fits into any interior style. For easy mounting two in-wall boxes are available: E-MODIN for dry walls and N-MODIN for brick walls.

ALINP

In lots of applications a local input control can be a useful and above all a timesaving product. No complex devices with multiple buttons to control -- just plug in and control the volume, nothing more, nothing less!

Especially in rooms where very often a music source or microphone is used, the ALINP plays its role. Think of classrooms where each hour a different teacher uses the classroom and wants to plug in his laptop or meeting rooms where presentations are given on a regular basis. What about multi-function rooms, bars, restaurants or banquet rooms? With the ALINP you can connect your device in a blink of an eye!

The ALINP is a local input wall control panel that makes it possible to connect a music source and/or dynamic microphone. The connected music source (via stereo line-in summed to mono internally) and microphone (via XLR-input) have individual volume control. The built-in mic pre-amplifier and high-quality input transformer (to avoid ground loops) guarantees an exceptional audio quality. The line and microphone input are automatically mixed together so that only one input at your pre-amplifier or mixing amplifier is used. The XLR microphone input is not providing phantom power.

D-ALINP

In lots of applications a local input control can be a useful and above all a timesaving product. No complex devices with multiple buttons to control -- just plug in and control the volume, nothing more, nothing less!

Especially in rooms where very often a music source or microphone is used, the D-ALINP plays its role. Think of classrooms where each hour a different teacher uses the classroom and wants to plug in his laptop or meeting rooms where presentations are given on a regular basis. What about multi-function rooms, bars, restaurants or banquet rooms? With the D-ALINP you can connect your device in a blink of an eye!

The D-ALINP is a local input wall control panel that makes it possible to connect a music source and/or dynamic microphone. The connected music source (via stereo line-in summed to mono internally) and microphone (via XLR-input) have individual volume control. The built-in mic pre-amplifier and high-quality input transformer (to avoid ground loops) guarantees an exceptional audio quality. The line and microphone input are automatically mixed together so that only one input at your pre-amplifier or mixing amplifier is used. The XLR microphone input is not providing phantom power.

The D-ALINP fits into any standard Decora in-wall box.

D-DIWAC

The D-DIWAC is a wall mount controller with a North American form factor, purpose-built to control the PREZONE2. The D-DIWAC is simple to install and easily configured as an audio controller with 'source select' and 'volume adjustment' buttons. The 2 line - 12 character LCD-display has a timed (adjustable) white backlight.

D-VOL30

The D-VOL30 is a 70-volt volume control. It can handle up to 30 watts of power and is very durable thanks to the step-by-step attenuation in 11 steps + zero position. The D-VOL30 is designed to handle 24V priority signals. This means that you can always get an announcement out, even to zones where the local volume control is in the ‘OFF’ position. If your amplifier has a 24V priority output, it will send a 24V signal when you push the talk button on the microphone. The 24V signal will close a relay on the D-VOL30 volume control, and the signal will pass, even when the volume control is in the ‘OFF’ position. This can be very useful for emergency or evacuation messages. The D-VOL30 is built on a universal chassis that easily can be integrated with any Decora box offering a flush mount and neat finish.

D-VOL60

The D-VOL60 is a 70-volt volume control. It can handle up to 60 watts of power and is very durable thanks to the step-by-step attenuation in 11 steps + zero position. The D-VOL60 is designed to handle 24V priority signals. This means that you can always get an announcement out, even to zones where the local volume control is in the ‘OFF’ position. If your amplifier has a 24V priority output, it will send a 24V signal when you push the talk button on the microphone. The 24V signal will close a relay on the D-VOL60 volume control, and the signal will pass, even when the volume control is in the ‘OFF’ position. This can be very useful for emergency or evacuation messages. The D-VOL60 is built on a universal chassis that easily can be integrated with any Decora box offering a flush mount and neat finish.

D-VOL120

The D-VOL120 is a 70-volt volume control. It can handle up to 120 watts of power and is very durable thanks to the step-by-step attenuation in 11 steps + zero position. The D-VOL120 is designed to handle 24V priority signals. This means that you can always get an announcement out, even to zones where the local volume control is in the ‘OFF’ position! If your amplifier has a 24V priority output, it will send a 24V signal when you push the talk button on the microphone. The 24V signal will close a relay on the D-VOL120 volume control, and the signal will pass, even when the volume control is in the ‘OFF’ position. This can be very useful for emergency or evacuation messages. The D-VOL120 is built on a universal chassis that easily can be integrated with any Decora box offering a flush mount and neat finish.

DIPEX

DIPEX is a versatile digital priority / emergency extender for use with AUDIOCONTROL12.8, easy to configure via the host's graphical installer interface. It allows you to connect message players (e.g. promotional messages in supermarkets that change on a daily basis or modern pop tunes as an alternative to the boring old fashioned school bell) or to make a connection with EVAC and alarm centrals to produce evacuation messages or alarm signals. DIPEX also allows you to page via the telephone central or to create an overall mute contact for the AUDIOCONTROL12.8.

When the DIPEX has been triggered, the line level signal will go into the AUDIOCONTROL12.8 via the DIMIC paging bus. The priority level of DIPEX can be set between 0 and 7. The 'priority zero' makes the line level signal of the DIPEX have absolute priority, a must in case of emergencies! Priority zero is only available on the DIPEX and cannot be selected on DIMIC microphones.

When the priority switch is activated, the chime for the AUDIOCONTROL12.8 will not sound. Another advantage of DIPEX is its full range sound quality that allows alarm or messages between 20 Hz and 20 kHz. DIPEX has a configuration/test button, power and multicolor status LED.

DIWAC

The DIWAC is a wall mount controller with a European form factor, purpose-built to control the PREZONE2. The DIWAC is simple to install and easily configured as an audio controller with 'source select' and 'volume adjustment' buttons. The 2 line - 12 character LCD-display has a timed (adjustable) white backlight.

E-VOL20

The E-VOL20 is a 100-volt volume control. It can handle up to 20 watts of power and is very durable thanks to the step-by-step attenuation in 11 steps + zero position. The E-VOL20 is designed to handle 24V priority signals. This means that you can always get an announcement out, even to zones where the local volume control is in the ‘OFF’ position!

If your amplifier has a 24V priority output, it will send a 24V signal when you push the talk button on the microphone. The 24V signal will close a relay on the E-VOL20 volume control, and the signal will pass, even when the volume control is in the ‘OFF’ position. This can be very useful for emergency or evacuation messages. The E-VOL20 is built on a universal chassis that easily can be integrated with Jung and Euro.

E-VOL40

The E-VOL40 is a 100 volt volume control that can handle up to 40 watts of power. It is very versatile thanks to the step-by-step attenuation in 11 steps + zero position. The E-VOL40 is designed to handle 24V priority signals. This means that you can always get an announcement out, even to zones where the local volume control is in the ‘OFF’ position!

If your amplifier has a 24V priority output, it will send a 24 V signal when you push the talk button on the microphone. The 24V signal will close a relay on the E-VOL40 volume control, and the signal will pass, even when the volume control is in the ‘OFF’ position. This can be very useful for emergency or evacuation messages. The E-VOL40 is built on a universal chassis that easily can be integrated with Jung and Euro.

E-VOL60

The E-VOL60 is a 100-volt volume control. It can handle up to 60 watts of power. It is very versatile thanks to the step-by-step attenuation in 11 steps + zero position. The E-VOL60 is designed to handle 24V priority signals. This means that you can always get an announcement out, even to zones where the local volume control is in the ‘OFF’ position!

If your amplifier has a 24V priority output, it will send a 24V signal when you push the talk button on the microphone. The 24V signal will close a relay on the E-VOL60 volume control, and the signal will pass, even when the volume control is in the ‘OFF’ position. This can be very useful for emergency or evacuation messages. The E-VOL60 is built on a universal chassis that easily can be integrated with Jung and Euro.

E-VOL120

The E-VOL120 is a 100-volt volume control that can handle up to 120 watts of power. It is very versatile thanks to the step-by-step attenuation in 11 steps + zero position. The E-VOL 120 is designed to handle 24V priority signals. This means that you can always get an announcement out, even to zones where the local volume control is in the ‘OFF’ position!

If your amplifier has a 24V priority output, it will send a 24V signal when you push the talk button on the microphone. The 24V signal will close a relay on the E-VOL120 volume control, and the signal will pass, even when the volume control is in the ‘OFF’ position. This can be very useful for emergency or evacuation messages. The E-VOL120 is built on a universal chassis that easily can be integrated with Jung and Euro.

E-VOLST

The E-VOLST is a 4 ohm, low impedance stereo volume control that can handle up to 2 x 40 watts of power. It is very versatile thanks to the step-by-step attenuation in 10 steps.

The E-VOLST is built on a universal chassis that easily can be integrated with Jung and Euro. It can only be used with E-MODON as a surface mounted volume control.

PCD-REM

PCD-REM is an optional IR remote control that enables DVD functionality on PCR3000RMKII and PC1000RMKII.

SDQ5PIR-REM

The SDQ5PIR-REM is an infrared remote control for the successful SDQ5P speaker set. This wireless remote control is especially handy as the speaker sets controls are on the back of the active speaker, and both speakers are mostly wall mounted, often high in a corner. The IR receiver eye is in the front grill of the active speaker.

ZONE4R

ZONE4R is a remote control panel for the ZONE4 multifunctional 4-zone pre-amplifier. The control panel offers music level control, source selection and microphone mix level control. A clear digital display makes it easy to monitor the functioning of the unit.

The remote panels are easy to install and are connected to the ZONE4 by a standard CAT-5 cable (or higher). Both T-568A and T-568B cable terminations can be used. The maximum approved CAT5 cable length is 100m per zone, according to circumstances. Mounting screws are included. A build-in box (BBi1) and surface mounted back box (BB1) is available.

The maximum ZONE4R control panels connected to a single ZONE 4 pre-amplifier is 8 pieces in any configuration (e.g. 2 panels x 4 zones or 8 panels x 1 zone or any other combination with a total of 8 panels). You can connect multiple ZONE4R units to the ZONE4 main unit using the RJ45 split hub.