Commercial Audio
- Commercial Audio Control Interfaces
- ACPL
- ACPR
- ALINP
- D-ALINP
- D-DIWAC
- D-VOL30
- D-VOL60
- D-VOL120
- DIPEX
- DIWAC
- E-VOL20
- E-VOL40
- E-VOL60
- E-VOL120
- E-VOLST
- PCD-REM
- SDQ5PIR-REM
- ZONE4R
- Commercial Audio Power Amplifiers
- AMP-D225H
- CHAMP-4
- PA240P
- PA2240BP
- REVAMP1120T
- REVAMP1680
- REVAMP2060T
- REVAMP2120T
- REVAMP2150
- REVAMP2250
- REVAMP2600
- REVAMP4100
- REVAMP4120T
- REVAMP4240T
- REVAMP8250
Commercial Audio Microphones.
DIMIC1
DIMIC1
The DIMIC1 is an all call digital paging station for use with AUDIOCONTROL12.8 that is easy to configure via the host’s graphical installer interface. In most applications an all call microphone is indispensable to guarantee good communication.
The DIMIC1 microphone is especially designed to function in a plug and play way with our electronics and makes sure that your message will be heard loud and clear throughout the entire office. DIMIC1 combines an inconspicuous and elegant design with
a remarkable sound quality. It has speech-optimized sound processing and a unidirectional condenser microphone. The unit has Universal configuration of push buttons, an all zone selection button and a push-to-talk button and multicolor paging status
LED's.
The DIMIC1 is an all call digital paging station for use with AUDIOCONTROL12.8 that is easy to configure via the host’s graphical installer interface. In most applications an all call microphone is indispensable to guarantee good communication.
The DIMIC1 microphone is especially designed to function in a plug and play way with our electronics and makes sure that your message will be heard loud and clear throughout the entire office. DIMIC1 combines an inconspicuous and elegant design with
a remarkable sound quality. It has speech-optimized sound processing and a unidirectional condenser microphone. The unit has Universal configuration of push buttons, an all zone selection button and a push-to-talk button and multicolor paging status
LED's.
Additional Information
DIMIC12
DIMIC12
DIMIC12 is a selective programmable digital paging station with the possibility to communicate with different zones in your office. The DIMIC12 can be used for 12 different zones. When the DIMIC12 is used with AUDIOCONTROL12.8 you can allocate buttons to perform actions like opening a door, controlling a sound source, ring a bell or even start a series of commands. This paging station is designed for use with AUDIOCONTROL12.8 and easy to configure via the host’s graphical user interface. DIMIC12 combines an inconspicuous and elegant design with a remarkable sound quality. It has speech-optimized sound processing and a unidirectional condenser microphone. The unit has universal configuration of push buttons, 12 free configurable selection buttons, status LEDs, a push-to-talk button and multi-color paging status LED. Expandable with maximum 7 x DIMIC12S.
DIMIC12 is a selective programmable digital paging station with the possibility to communicate with different zones in your office. The DIMIC12 can be used for 12 different zones. When the DIMIC12 is used with AUDIOCONTROL12.8 you can allocate buttons to perform actions like opening a door, controlling a sound source, ring a bell or even start a series of commands. This paging station is designed for use with AUDIOCONTROL12.8 and easy to configure via the host’s graphical user interface. DIMIC12 combines an inconspicuous and elegant design with a remarkable sound quality. It has speech-optimized sound processing and a unidirectional condenser microphone. The unit has universal configuration of push buttons, 12 free configurable selection buttons, status LEDs, a push-to-talk button and multi-color paging status LED. Expandable with maximum 7 x DIMIC12S.
Additional Information
DIMIC12S
DIMIC12S
DIMIC12S is an extension unit for the DIMIC12 digital paging station. Per DIMIC12 you can connect up to 7 DIMIC12S expansion units allowing a total of 96 programmable buttons available. When the DIMIC12S is used with AUDIOCONTROL12.8 you can allocate
buttons to perform actions like opening a door, controlling a sound source, ring a bell or even start a series of commands. The DIMIC12S has 12 free configurable selection buttons and status LEDs.
DIMIC12S is an extension unit for the DIMIC12 digital paging station. Per DIMIC12 you can connect up to 7 DIMIC12S expansion units allowing a total of 96 programmable buttons available. When the DIMIC12S is used with AUDIOCONTROL12.8 you can allocate
buttons to perform actions like opening a door, controlling a sound source, ring a bell or even start a series of commands. The DIMIC12S has 12 free configurable selection buttons and status LEDs.
Additional Information
MDS.CHAIR
MDS.CHAIR
The MDS is a highly flexible small to medium size tabletop discussion system. This easy to set up and use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain.
This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone.
The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting.
The MDS is a highly flexible small to medium size tabletop discussion system. This easy to set up and use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain.
This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone.
The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting.
Additional Information
MDS.DEL
MDS.DEL
The MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain.
This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone.
The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting.
The MDS.DEL complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
The MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain.
This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone.
The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting.
The MDS.DEL complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
Additional Information
MDS.INT
MDS.INT
The MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain.
This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone.
The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting.
The MDS.INT complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
The MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain.
This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone.
The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting.
The MDS.INT complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the U.S. federal government.
Additional Information
MICPAT-2
MICPAT-2
The MICPAT-2 is a sturdy table type paging microphone. It is ideal for use with CONCEPT1T and MA247MR. It has a flexible gooseneck and a high quality unidirectional dynamic microphone capsule. With MICPAT-2 you can make paging calls to maximum two zones simultaneously (zone 1 individual, zone 2 individual or both zones). A clear LED indication for both the zones is integrated in the solid microphone base. The aluminum base is equipped with two push-to-talk switches.
The MICPAT-2 is a sturdy table type paging microphone. It is ideal for use with CONCEPT1T and MA247MR. It has a flexible gooseneck and a high quality unidirectional dynamic microphone capsule. With MICPAT-2 you can make paging calls to maximum two zones simultaneously (zone 1 individual, zone 2 individual or both zones). A clear LED indication for both the zones is integrated in the solid microphone base. The aluminum base is equipped with two push-to-talk switches.
Additional Information
MICPAT-4
MICPAT-4
The MICPAT-4 is a sturdy active multizone-paging microphone. It has a flexible gooseneck and a high-quality directional condenser microphone. With MICPAT-4 you can make paging calls to a maximum of four zones simultaneously. It has been designed specifically for use with the ZONE4 pre-amplifier and future models. Multiple MICPAT-4 mics can be connected in parallel by using the optional RJ45SPLIT splitter.
The MICPAT-4 is a sturdy active multizone-paging microphone. It has a flexible gooseneck and a high-quality directional condenser microphone. With MICPAT-4 you can make paging calls to a maximum of four zones simultaneously. It has been designed specifically for use with the ZONE4 pre-amplifier and future models. Multiple MICPAT-4 mics can be connected in parallel by using the optional RJ45SPLIT splitter.
Additional Information
MICPAT-D
MICPAT-D
The MICPAT-D is an all call dynamic paging microphone. It has a flexible stem and a high quality unidirectional dynamic microphone capsule. The paging microphone is intended for making calls to all zones. The microphone has a stable aluminum base, equipped with a toggle switch that allows Talk - Off - Continuous talk. MICPAT-D comes with 3m cable and a DIN5 connector.
The MICPAT-D is an all call dynamic paging microphone. It has a flexible stem and a high quality unidirectional dynamic microphone capsule. The paging microphone is intended for making calls to all zones. The microphone has a stable aluminum base, equipped with a toggle switch that allows Talk - Off - Continuous talk. MICPAT-D comes with 3m cable and a DIN5 connector.
Additional Information
GET A QUOTE
Fill out this form to inquire about ordering any of the products above. A Biamp expert will reach out to you via phone or email. In some regions we may share your contact details and inquiry with one of our qualified third-party sales partners to follow up directly to ensure better local service. For more information please see our Privacy Policy.