Impera Connect-X MP6
Impera Connect-X MP6
The Impera Connect-X MP6 is a lightweight peripheral that easily extends the versatility of Impera controllers, control pads, and Apprimo Touch 8i control panels by adding serial, IR, GPIO and LAN control to Impera controllers connected to local area networks. Each LAN-connected Impera controller can host up to eight Connect-X MP6 multiport extenders without consuming any LAN ports. The Connect-X MP6 bridges the local area network and conventional AV ports, letting installers use the convenience of Ethernet cabling to bring AV ports directly to devices. At less than one-quarter pound (110g), the Connect-X MP6 is easily mounted using screws, double sided tape, or zip ties.
The Connect-X MP6 is easily configured within Project Designer software as the needs of the room change over time, making it a very flexible and cost-effective room control accessory.
FEATURES
- 1 bidirectional RS-232/IR port for third party control with feedback
- 2 unidirectional RS-232/IR ports for third party control
- 3 GPIO ports
- LAN control of 2 additional IP devices
- PoE powered (IEEE 802.3at Class 1, 4W) for simple, single CAT5e/CAT6 cable installation
- Lightweight design less than one quarter pound (110g)
- Mounted with screws, zip ties or double-sided tape
- Covered by a five-year warranty
The Impera Connect-X MP6 is a lightweight peripheral that easily extends the versatility of Impera controllers, control pads, and Apprimo Touch 8i control panels by adding serial, IR, GPIO and LAN control to Impera controllers connected to local area networks. Each LAN-connected Impera controller can host up to eight Connect-X MP6 multiport extenders without consuming any LAN ports. The Connect-X MP6 bridges the local area network and conventional AV ports, letting installers use the convenience of Ethernet cabling to bring AV ports directly to devices. At less than one-quarter pound (110g), the Connect-X MP6 is easily mounted using screws, double sided tape, or zip ties.
The Connect-X MP6 is easily configured within Project Designer software as the needs of the room change over time, making it a very flexible and cost-effective room control accessory.
FEATURES
- 1 bidirectional RS-232/IR port for third party control with feedback
- 2 unidirectional RS-232/IR ports for third party control
- 3 GPIO ports
- LAN control of 2 additional IP devices
- PoE powered (IEEE 802.3at Class 1, 4W) for simple, single CAT5e/CAT6 cable installation
- Lightweight design less than one quarter pound (110g)
- Mounted with screws, zip ties or double-sided tape
- Covered by a five-year warranty
Additional Information
Impera SR-2
Impera SR-2
The Impera SR-2 is a two-relay unit designed for simple applications when only minimal switching is required, such as raising and lowering a screen. Control is via dedicated inputs, one for each relay, accepting control signals from an Impera controller. Separate high-voltage relay connections are provided, as well as a dedicated “screen mode” connection. Test buttons are provided for manual activation of relays, with LEDs for indication of relay state (open or pulled).
View more information here.
- Two relays assignable to screen mode or low voltage applications
- Dedicated connection mode for screen or projector lift
- Relays may be used for switching either high or low voltage
- Test buttons enable testing of relay functions during installation
- Installs quickly and easily in drop ceilings
- Internal tabs for securing cables
- Covered by Biamp Systems’ five-year warranty
The Impera SR-2 is a two-relay unit designed for simple applications when only minimal switching is required, such as raising and lowering a screen. Control is via dedicated inputs, one for each relay, accepting control signals from an Impera controller. Separate high-voltage relay connections are provided, as well as a dedicated “screen mode” connection. Test buttons are provided for manual activation of relays, with LEDs for indication of relay state (open or pulled).
View more information here.
- Two relays assignable to screen mode or low voltage applications
- Dedicated connection mode for screen or projector lift
- Relays may be used for switching either high or low voltage
- Test buttons enable testing of relay functions during installation
- Installs quickly and easily in drop ceilings
- Internal tabs for securing cables
- Covered by Biamp Systems’ five-year warranty
Additional Information
Impera SR-4
Impera SR-4
The Impera SR-4 is a four-relay unit designed for applications of moderate complexity. Control is via dedicated inputs, one for each relay, accepting control signals from an Impera controller. Separate high voltage relay connections are provided, as well as a dedicated “screen mode” connection. Test buttons are provided for manual activation of relays, with LEDs for indication of relay state (open or pulled).
View more information here.
- Four relays assignable to screen mode or low voltage applications
- Dedicated connection mode for screen or projector lift
- Relays may be used for switching either high or low voltage
- Test buttons enable testing of relay functions during installation
- Installs quickly and easily in drop ceilings
- Internal tabs for securing cables
- Covered by Biamp Systems’ five-year warranty
The Impera SR-4 is a four-relay unit designed for applications of moderate complexity. Control is via dedicated inputs, one for each relay, accepting control signals from an Impera controller. Separate high voltage relay connections are provided, as well as a dedicated “screen mode” connection. Test buttons are provided for manual activation of relays, with LEDs for indication of relay state (open or pulled).
View more information here.
- Four relays assignable to screen mode or low voltage applications
- Dedicated connection mode for screen or projector lift
- Relays may be used for switching either high or low voltage
- Test buttons enable testing of relay functions during installation
- Installs quickly and easily in drop ceilings
- Internal tabs for securing cables
- Covered by Biamp Systems’ five-year warranty
Additional Information
Contact Us.
Our sales and support teams are ready to help.
Contact us today.
general information
Email:
moc.pmaib@ofnipmaibUS Phone:
1 800 826 1457International Phone:
+1 503 641 7287
technical
supportEmail Biamp Support:
moc.pmaib@troppusUS Phone:
1 877 BIAMP XO (1 877 242 6796)International Phone:
Choose Your RegionTech Return Authorization Request Cornerstone - Online Tech Support
orders
supportEmail:
moc.pmaib@sredroGlobal Phone:
1 800 826 1457 opt 1International Support:
Choose your RegionOrder & shipping status, availability
Orders Return Authorization Request