Vocia VA-2060
Vocia VA-2060
The VA-2060 is a digital networked two-channel amplifier. It is CobraNet-enabled and capable of delivering continuous audio power at 60 Watts RMS per channel. The VA-2060 also has comprehensive failover capability with device-to-device and channel-to-channel failover.
- Two channels of 60W RMS per channel
- Transformer coupled outputs, low impedance (4 or 8Ω) or 25V, 70V or 100V (hardware selectable)
- Comprehensive failover:
- Device-to-device
- All-to-1 channel
- 1:1 channel
- Supports Page Active Relay (PAR), ELD-1, and ANC-1
- Local non-volatile storage of emergency messages
- LED status and signal indication
- Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization, and output sensitivity
- CobraNet audio/control with dynamic use of available bundles
- Dual Ethernet ports for redundancy
- Rotary switches for device identification
- Rack mountable (2RU)
- CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
The VA-2060 is a digital networked two-channel amplifier. It is CobraNet-enabled and capable of delivering continuous audio power at 60 Watts RMS per channel. The VA-2060 also has comprehensive failover capability with device-to-device and channel-to-channel failover.
- Two channels of 60W RMS per channel
- Transformer coupled outputs, low impedance (4 or 8Ω) or 25V, 70V or 100V (hardware selectable)
- Comprehensive failover:
- Device-to-device
- All-to-1 channel
- 1:1 channel
- Supports Page Active Relay (PAR), ELD-1, and ANC-1
- Local non-volatile storage of emergency messages
- LED status and signal indication
- Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization, and output sensitivity
- CobraNet audio/control with dynamic use of available bundles
- Dual Ethernet ports for redundancy
- Rotary switches for device identification
- Rack mountable (2RU)
- CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
Additional Information
Vocia VA-2060e
Vocia VA-2060e
The VA-2060e has local analog inputs, a dual power supply, and is EN 54-16 certified.
- Local background source support with single mic/line analog audio input for each channel (gain-adjustable, switchable phantom power)
- Dual power supply:
- AC Mains
- Single or Dual 24V DC inputs
- EN 54-16 certified, EN 60849 and AS 60849 verified
- Covered by Biamp Systems’ five-year warranty
The VA-2060e has local analog inputs, a dual power supply, and is EN 54-16 certified.
- Local background source support with single mic/line analog audio input for each channel (gain-adjustable, switchable phantom power)
- Dual power supply:
- AC Mains
- Single or Dual 24V DC inputs
- EN 54-16 certified, EN 60849 and AS 60849 verified
- Covered by Biamp Systems’ five-year warranty
Additional Information
Vocia VA-4030
Vocia VA-4030
The VA-4030 is a digital networked four-channel amplifier. It is CobraNet-enabled and capable of delivering continuous audio power at 30 Watts RMS per channel. The VA-4030 also has comprehensive failover capability with device-to-device and channel-to-channel failover.
- Four channels of 30W RMS per channel
- Transformer coupled outputs, Low impedance (4 or 8Ω) or 25V, 70V or 100V (hardware selectable)
- Comprehensive failover:
- Device-to-device
- All-to-1 channel
- 1:1 channel
- Supports Page Active Relay (PAR), ELD-1, and ANC-1
- Local non-volatile storage of emergency messages
- LED status and signal indication
- Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization, and output sensitivity
- CobraNet audio/control with dynamic use of available bundles
- Dual Ethernet ports for redundancy
- Rotary switches for device identification
- Rack mountable (2RU)
- CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
The VA-4030 is a digital networked four-channel amplifier. It is CobraNet-enabled and capable of delivering continuous audio power at 30 Watts RMS per channel. The VA-4030 also has comprehensive failover capability with device-to-device and channel-to-channel failover.
- Four channels of 30W RMS per channel
- Transformer coupled outputs, Low impedance (4 or 8Ω) or 25V, 70V or 100V (hardware selectable)
- Comprehensive failover:
- Device-to-device
- All-to-1 channel
- 1:1 channel
- Supports Page Active Relay (PAR), ELD-1, and ANC-1
- Local non-volatile storage of emergency messages
- LED status and signal indication
- Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization, and output sensitivity
- CobraNet audio/control with dynamic use of available bundles
- Dual Ethernet ports for redundancy
- Rotary switches for device identification
- Rack mountable (2RU)
- CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
Additional Information
Vocia VA-4030e
Vocia VA-4030e
The VA-4030e has local analog inputs, a dual power supply, and is EN 54-16 certified.
- Local background source support with single mic/line analog audio input for each channel (gain-adjustable, switchable phantom power)
- Dual power supply:
- AC Mains
- Single or Dual 24V DC inputs
- EN 54-16 certified, EN 60849 and AS 60849 verified
- Covered by Biamp Systems’ five-year warranty
The VA-4030e has local analog inputs, a dual power supply, and is EN 54-16 certified.
- Local background source support with single mic/line analog audio input for each channel (gain-adjustable, switchable phantom power)
- Dual power supply:
- AC Mains
- Single or Dual 24V DC inputs
- EN 54-16 certified, EN 60849 and AS 60849 verified
- Covered by Biamp Systems’ five-year warranty
Additional Information
Vocia VA-4300CV
Vocia VA-4300CV
The VA-4300CV is a digital networked four-channel constant voltage 70V/100V amplifier. It is CobraNet-enabled and capable of delivering continuous audio power at 300 Watts per channel. The VA-4300CV also has dual Ethernet ports for redundant CobraNet connectivity, comprehensive failover capabilities (device-to-device and channel-to-channel failover), and dual power inputs.
- Four channels; 300W per channel
- Page active relay
- Comprehensive failover
- Extended audio delay (up to 32 seconds per channel)
- CobraNet audio/control with dynamic use of available bundles
- Flexible line monitoring
- Dual Ethernet ports for network redundancy
- Dual power inputs (100-240V and 2x 48V DC)
- Rack mountable (2RU)
- EN 54-16 certified, CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
The VA-4300CV is a digital networked four-channel constant voltage 70V/100V amplifier. It is CobraNet-enabled and capable of delivering continuous audio power at 300 Watts per channel. The VA-4300CV also has dual Ethernet ports for redundant CobraNet connectivity, comprehensive failover capabilities (device-to-device and channel-to-channel failover), and dual power inputs.
- Four channels; 300W per channel
- Page active relay
- Comprehensive failover
- Extended audio delay (up to 32 seconds per channel)
- CobraNet audio/control with dynamic use of available bundles
- Flexible line monitoring
- Dual Ethernet ports for network redundancy
- Dual power inputs (100-240V and 2x 48V DC)
- Rack mountable (2RU)
- EN 54-16 certified, CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
Additional Information
Vocia VA-8150CV
Vocia VA-8150CV
The VA-8150CV is a digital networked eight-channel constant voltage 70V/100V amplifier. It is CobraNet-enabled and capable of delivering continuous audio power at 150 Watts per channel. The VA-8150CV also has dual Ethernet ports for redundant CobraNet connectivity, comprehensive failover capabilities (device-to-device and channel-to-channel failover), and dual power inputs.
- Eight channels; 150W per channel
- Page active relay
- Comprehensive failover
- Extended audio delay (up to 32 seconds per channel)
- CobraNet audio/control with dynamic use of available bundles
- Flexible line monitoring
- Dual Ethernet ports for network redundancy
- Dual power inputs (100-240V and 2x 48V DC)
- Rack mountable (2RU)
- EN 54-16 certified, CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
The VA-8150CV is a digital networked eight-channel constant voltage 70V/100V amplifier. It is CobraNet-enabled and capable of delivering continuous audio power at 150 Watts per channel. The VA-8150CV also has dual Ethernet ports for redundant CobraNet connectivity, comprehensive failover capabilities (device-to-device and channel-to-channel failover), and dual power inputs.
- Eight channels; 150W per channel
- Page active relay
- Comprehensive failover
- Extended audio delay (up to 32 seconds per channel)
- CobraNet audio/control with dynamic use of available bundles
- Flexible line monitoring
- Dual Ethernet ports for network redundancy
- Dual power inputs (100-240V and 2x 48V DC)
- Rack mountable (2RU)
- EN 54-16 certified, CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
Additional Information
Vocia VA-8600
Vocia VA-8600
The VA-8600 is a networked multi-channel amplifier. It is CobraNet-enabled and features eight channels of modular amplification and DSP with optional channel-to-channel or device-to-device failover.
- Modular based design
- Amplification modules with software configurable power levels/load options:
- 8 amplification modules per frame with 100 to 600 Watts per module (maximum of 2400W peak per chassis)
- 70V or 100V with direct drive capability, or low-impedance (4Ω or 8Ω) operation
- Maximum of 2400 Watts per chassis
- Failover capability between channels and amplifiers
- Failover capability between channels and amplifiers:
- Device-to-Device
- 1:1
- Dual 3:1 (VFOM-1 module required)
- 7:1 (VFOM-1 module required)
- LED Indication:
- Amplifier failure
- Clip present
- Fan stuck-rotor
- Heat sink temperature fault
- Signal peak
- Signal present
- Local non-volatile storage of emergency messages
- Software monitoring features:
- Amplifier failure
- Excessive clipping
- Fan stuck-rotor
- Heat sink temperature fault
- Peak present
- Short circuit on output
- Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization, and output sensitivity
- CobraNet audio and control data over a single Ethernet cable
- Dual Ethernet ports for redundancy
- Heavy duty removable terminal block connectors for speaker line connections
- Rotary switches for unit identification
- Rack mountable (3RU)
- CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
The VA-8600 is a networked multi-channel amplifier. It is CobraNet-enabled and features eight channels of modular amplification and DSP with optional channel-to-channel or device-to-device failover.
- Modular based design
- Amplification modules with software configurable power levels/load options:
- 8 amplification modules per frame with 100 to 600 Watts per module (maximum of 2400W peak per chassis)
- 70V or 100V with direct drive capability, or low-impedance (4Ω or 8Ω) operation
- Maximum of 2400 Watts per chassis
- Failover capability between channels and amplifiers
- Failover capability between channels and amplifiers:
- Device-to-Device
- 1:1
- Dual 3:1 (VFOM-1 module required)
- 7:1 (VFOM-1 module required)
- LED Indication:
- Amplifier failure
- Clip present
- Fan stuck-rotor
- Heat sink temperature fault
- Signal peak
- Signal present
- Local non-volatile storage of emergency messages
- Software monitoring features:
- Amplifier failure
- Excessive clipping
- Fan stuck-rotor
- Heat sink temperature fault
- Peak present
- Short circuit on output
- Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization, and output sensitivity
- CobraNet audio and control data over a single Ethernet cable
- Dual Ethernet ports for redundancy
- Heavy duty removable terminal block connectors for speaker line connections
- Rotary switches for unit identification
- Rack mountable (3RU)
- CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
Additional Information
Vocia VA-8600c
Vocia VA-8600c
The VA-8600c is a networked multi-channel amplifier. It is CobraNet-enabled and features eight channels of modular amplification and DSP with optional channel-to-channel or device-to-device failover, and is EN 54-16 certified.
- Modular based design
- Amplification modules have software configurable power levels/load options:
- 8 amplification modules per frame with 100 to 600 Watts per module
- 70V or 100V with direct drive capability, or low-impedance (4 or 8Ω) operation
- Maximum of 2400 Watts of power per chassis
- Failover capability between channels and amplifiers:
- Device-to-Device
- 1:1
- Dual 3:1 (VFOM-1 module required)
- 7:1 (VFOM-1 module required)
- LED Indication:
- Amplifier failure
- Clip present
- Fan stuck-rotor
- Heat sink temperature fault
- Signal peak
- Signal present
- Local non-volatile storage of emergency messages
- Software Monitoring Features:
- Amplifier failure
- Excessive clipping
- Fan stuck rotor
- Heat sink temperature fault
- Peak present
- Short circuit on output
- Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization, and output sensitivity
- CobraNet audio and control data over a single Ethernet cable
- Dual Ethernet ports for redundancy
- Rotary switches for unit identification
- Rack mountable (3RU)
- EN 54-16 certified, CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
The VA-8600c is a networked multi-channel amplifier. It is CobraNet-enabled and features eight channels of modular amplification and DSP with optional channel-to-channel or device-to-device failover, and is EN 54-16 certified.
- Modular based design
- Amplification modules have software configurable power levels/load options:
- 8 amplification modules per frame with 100 to 600 Watts per module
- 70V or 100V with direct drive capability, or low-impedance (4 or 8Ω) operation
- Maximum of 2400 Watts of power per chassis
- Failover capability between channels and amplifiers:
- Device-to-Device
- 1:1
- Dual 3:1 (VFOM-1 module required)
- 7:1 (VFOM-1 module required)
- LED Indication:
- Amplifier failure
- Clip present
- Fan stuck-rotor
- Heat sink temperature fault
- Signal peak
- Signal present
- Local non-volatile storage of emergency messages
- Software Monitoring Features:
- Amplifier failure
- Excessive clipping
- Fan stuck rotor
- Heat sink temperature fault
- Peak present
- Short circuit on output
- Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization, and output sensitivity
- CobraNet audio and control data over a single Ethernet cable
- Dual Ethernet ports for redundancy
- Rotary switches for unit identification
- Rack mountable (3RU)
- EN 54-16 certified, CE marked and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
Additional Information
Amplifier Modules.
The AM-600 is the Amplifier Module for the VA-8600 amplifier.
- 100 to 600 Watts per module
- Low impedance (4, 6, 8Ω), 70-Volt or 100-Volt line direct drive
- Power levels/load options are software configurable
- Front-panel LED indication for module fault, activity, and signal presence
- RoHS compliant
- Covered by Biamp Systems’ five-year warranty
The AM-600c is the Amplifier Module with standards-compliant ground fault detection for the VA-8600c amplifier.
- 100 to 600 Watts per module
- Low impedance (4, 6, 8Ω), 70-Volt or 100-Volt line direct drive
- Power levels/load options are software configurable
- Front-panel LED indication for module fault, activity, and signal presence
- Reports fault upon detection of short to ground on speaker line, where this short would compromise capability of amplifier to deliver emergency messages
- EN 54-16 certified, EN 60849 and AS 60849 verified and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
The PARM-1 is a Page Active Relay Module for the VA-8600 amplifier (optional).
- Allows control of external devices during paging (e.g. attenuator override relays)
- Suitable for the VA-8600 Option Slot
- Powered from and controlled by the VA-8600
- 8 relay circuits
- Connections via 3.5mm pluggable screw terminal blocks
- RoHS compliant
- Covered by Biamp Systems’ five-year warranty
The failover module is for use in the VA-8600/VA-8600c amplifiers (optional). It offers selectable 7:1 or dual 3:1 channel failover.
- 7:1 channel failover OR two sets of 3:1 channel failover
- EN 54-16 certified, EN 60849 and AS 60849 verified and RoHS compliant
- Covered by Biamp Systems’ five-year warranty
Contact Us.
Our sales and support teams are ready to help.
Contact us today.
general information
Email:
moc.pmaib@ofnipmaibUS Phone:
1 800 826 1457International Phone:
+1 503 641 7287
technical
supportEmail Biamp Support:
moc.pmaib@troppusUS Phone:
1 877 BIAMP XO (1 877 242 6796)International Phone:
Choose Your RegionTech Return Authorization Request Cornerstone - Online Tech Support
orders
supportEmail:
moc.pmaib@sredroGlobal Phone:
1 800 826 1457 opt 1Europe Phone:
+32 3 448 01 60Order & shipping status, availability
Orders Return Authorization Request