Commercial Audio
- Commercial Audio Control Interfaces
- ACPL
- ACPR
- ALINP
- D-ALINP
- D-DIWAC
- D-VOL30
- D-VOL60
- D-VOL120
- DIPEX
- E-VOL20
- E-VOL40
- E-VOL60
- E-VOL120
- E-VOLST
- PCD-REM
- SDQ5PIR-REM
- ZONE4R
- Commercial Audio Power Amplifiers
- AMP-D225H
- CHAMP-4
- PA240P
- PA2240BP
- REVAMP1120T
- REVAMP1680
- REVAMP2060T
- REVAMP2120T
- REVAMP2150
- REVAMP2250
- REVAMP2600
- REVAMP4100
- REVAMP4120T
- REVAMP4240T
- REVAMP8250
Commercial Audio Matrix Systems.
ZONE4
ZONE4
The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect.
There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.
The ZONE4 can be controlled from the front panel (with digital display), via the RS232-connector or via the IR serial. On top of that you can control the unit via the ZONE4R remote control panels. These control panels have a clear LED status display and buttons for music level, MIC/MIX level, source select and mute controls. Because the remote is wired with a normal CAT5 cable, it is very easy to install.
On the output side, there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further, there are independent MIC-MIX level control and bass-treble control per zone.
The unit is 19” format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.
The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect.
There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.
The ZONE4 can be controlled from the front panel (with digital display), via the RS232-connector or via the IR serial. On top of that you can control the unit via the ZONE4R remote control panels. These control panels have a clear LED status display and buttons for music level, MIC/MIX level, source select and mute controls. Because the remote is wired with a normal CAT5 cable, it is very easy to install.
On the output side, there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further, there are independent MIC-MIX level control and bass-treble control per zone.
The unit is 19” format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.
Additional Information
GET A QUOTE
Fill out this form to inquire about ordering any of the products above. A Biamp expert will reach out to you via phone or email. In some regions we may share your contact details and inquiry with one of our qualified third-party sales partners to follow up directly to ensure better local service. For more information please see our Privacy Policy.